
Installation Precautions for Deutz Generator Set
1. The installation site should maintain good ventilation, with sufficient air inlet at the generator end and good air outlet at the diesel engine end. The area of the air outlet should be more than 1.5 times the area of the water tank;
2. The surrounding area of the installation site should be kept clean, and items that can produce corrosive gases and vapors such as acid and alkali should be avoided from being placed nearby. If conditions permit, fire extinguishing devices should be installed.
3. If used indoors, the smoke exhaust pipe must be connected to the outside, with a diameter equal to or greater than the diameter of the exhaust pipe of the muffler. The number of bends in the connected pipe should not exceed 3 to ensure smooth smoke exhaust, and the pipe should be tilted downwards at 5-10 degrees to avoid rainwater from entering; If the exhaust pipe is installed vertically upwards, a rain cover must be added.
4. When the foundation is made of concrete, a level ruler must be used to measure its levelness during installation, so that the unit is fixed on a horizontal foundation. There should be dedicated shock-absorbing pads or foot bolts between the unit and the foundation.
5. The casing of the unit must have reliable protective grounding. For generators that require direct grounding of the neutral point, it must be grounded by professionals and equipped with lightning protection devices. It is strictly prohibited to use the grounding device of the mains for direct grounding of the neutral point.
6. The bidirectional switch between the generator and the mains power must be very reliable to prevent reverse power transmission. The wiring reliability of bidirectional switches needs to be inspected and approved by the local power supply department.
7. The wiring for starting the battery must be secure.
Robust Construction & Environmental Protection
Featuring a weather-resistant corten steel container enclosure, this generator provides superior protection against dust, sand, rain, and extreme temperatures. The advanced water cooling system and sound attenuation materials ensure stable operation at ambient temperatures up to 50°C with minimal noise output.
This generator serves multiple sectors including industrial, mining, commercial, and emergency scenarios. It functions as primary power for construction sites, mining operations, and factories, while also providing reliable backup power for hospitals, data centers, and commercial buildings.
Haichai Power Technology (Jiangsu) Co., Ltd. was established in 2015, backed by 10 years of comprehensive experience in the production, manufacturing, and sales of power generators.
Our factory covers an area of over 12,000 square meters, with an annual production capacity of more than 3,000 generator sets. We are equipped with 10 sets of production equipment, 5 dedicated production lines, and a team of over 200 skilled employees.













Q: Can the equipment be installed under hot weather?
A: We provide one-stop power generation solution, if you need to install and use it in hot weather, we will provide oil suitable for high temperature environment, and regularly check the battery level, replenish the distilled water, and regularly clean the dust and dirt on the heat sink of the generator set in order to improve the heat dissipation efficiency.
Q: Can Your products be installed under the cold weather?
A: We provide one-stop power generation solutions, if you need to install and use in cold weather, you need the unit supporting the water jacket heater and other accessories.
Q: Can I only buy some spare parts from you?
A: If you need to buy accessories separately, you can contact hicpower@hicpower.com and explain the intention, we will have a commissioner to interface with you!
Q: Will you will attend the fair to show your products?
A: HiC Power Participates in Electricity-Related Exhibitions Across the Country.